• sns01
  • sns02
  • Pinterest
  • linkedin1
English
Read More About bearing factory

Oct . 16, 2025 17:05 Back to list

Sealed UCF209 Cast Iron Flange Housing Square Bearing Unit?


Field Notes on the UCF209 Cast Iron Flange Housing Square Bearing Unit

I spent a good chunk of last month around conveyors and grain elevators, and—no surprise—this square flange unit kept popping up. The UCF209 Cast Iron Flange Housing Square Bearing Unit sits at that sweet spot of rugged, affordable, and easy to swap on a tired line during a late-night maintenance window. It’s not flashy, but in real-world uptime, it earns its keep.

Sealed UCF209 Cast Iron Flange Housing Square Bearing Unit?

What’s driving demand right now

Two trends: maintenance teams want ready-to-mount units with predictable life, and buyers are pushing for better sealing and grease life (less downtime, fewer call-outs). In fact, many customers say a basic cast-iron housing with a reliable UC insert and decent seals beats “exotic” options unless corrosion is extreme. Condition monitoring is creeping in too—grease nipples and vibration-friendly housings are becoming standard asks.

Quick specifications (shop-floor friendly)

Bore (d) ≈ 45 mm (UC209 insert)
Housing material Cast iron (GG20/HT200, similar to ASTM A48 Class 30)
Insert material High-carbon chromium steel (GCr15 / AISI 52100), hardened 60–64 HRC
Locking Twin set-screws on the inner ring (typ. 120° apart)
Seals Contact rubber seal with flinger (NBR); greaseable
Dynamic load rating (C) ≈ 31–34 kN (per ISO 281 methods; real-world use may vary)
Bolt hole Ø / pattern ≈ 14 mm holes; square 4-bolt flange, center distance ≈ 95–105 mm
Finish Phosphate or enamel-coated housing; anti-rust oil on insert

Manufacturing and testing (how it’s built)

Housing is cast, shot-blasted, machined, and coated. Inserts go through turning, heat treatment, precision grinding, and 100% dimensional checks per ISO 492 tolerances (normal class). Grease is typically NLGI 2 lithium complex EP. Salt-spray checks (NSS) around 72–96 h per ISO 9227 are common on coated housings. Noise/vibration and radial clearance are verified batch-wise; L10 life estimates follow ISO 281. In steady moderate load, a UCF209 Cast Iron Flange Housing Square Bearing Unit often sees 20,000–50,000 h—assuming alignment and relube are not neglected (easier said than done, I know).

Where it works best

  • Aggregates conveyors, bucket elevators, and screens
  • Grain handling and feed mills
  • HVAC blowers and mid-size fans
  • Packaging and woodworking lines
  • Light agricultural machinery

If washdown is heavy or corrosives are present, I’d consider stainless or a coated housing variant. But for most dusty, dry-to-damp environments, the UCF209 Cast Iron Flange Housing Square Bearing Unit is a solid, economical pick.

Vendor snapshot (pricing vs. performance)

Vendor Typical Price Lead Time QC / Certs Notes
BTZ Bearing (Origin: No. 3, Area B, Beihuan Road, Linxi County, Xingtai, Hebei) $ Stock–2 weeks ISO 9001; batch test reports Good value; customization friendly
Generic Import $ (lowest) Varies Basic COA Watch tolerances and grease fill
Premium Global Brand $$$ 1–4 weeks ISO 9001; full traceability Top sealing; longest service life

Customization options

Alternate seals (triple-lip), food-grade or high-temp grease, inch bores (e.g., 1-3/4"), anti-corrosion coatings, and eccentric locking are all doable. Some users also request pre-applied threadlocker in set-screws—small detail, nice touch.

Mini case files

Aggregate plant, Midwest: swapping legacy flanges to UCF209 units cut weekly relube to biweekly; vibration dropped ≈12% after alignment and fresh grease protocol (ASTM D4170 wear checks on grease showed lower debris counts).

Feed mill, APAC: after upgrading seals and using lithium-complex EP2, mean time between failures rose from 9 to ≈20 months on a critical elevator head pulley.

Customer voice

“Not fancy, just dependable. The square pattern makes change-outs painless. We keep two on the shelf and sleep better.” — Maintenance lead, packaging line.

Standards and references

Conformance typically referenced to ISO 281 (life), ISO 492 (tolerances). Coating checks per ISO 9227 salt spray. Internal grease screening sometimes uses ASTM D4170 and ASTM D3336 protocols. Always confirm with your vendor’s COA.

Authoritative citations

  1. ISO 281: Rolling bearings — Dynamic load ratings and rating life.
  2. ISO 492: Rolling bearings — Radial bearings — Tolerances.
  3. ISO 9227: Corrosion tests in artificial atmospheres — Salt spray tests.
  4. ASTM D4170: Standard Test Method for Fretting Wear Protection of Lubricating Greases.
  5. ASTM D3336: Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures.
Share


Next：

Latest news

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.