customers
GRAE30-208-NPP-B-AH01 Radial Insert Ball Bearing
  • GRAE30-208-NPP-B-AH01 Radial Insert Ball Bearing
  • GRAE30-208-NPP-B-AH01 Insert Ball Bearing
  • GRAE30-208-NPP-B-AH01
  • GRAE30-208-NPP-B-AH01 Ball Bearing

GRAE30-208-NPP-B-AH01 Radial Insert Ball Bearing

30*80*43.7mm GRAE30-208-NPP-B-AH01, we have it in stock now and can arrange delivery for you at any time.

Details

Tags

GRAE 30-208 NPP-B-AH01 Bearing Introduction:

 

Inner diameter:30mm
Outer diameter:80mm
Width :43.70mm
Weight (kg):0.72
Material : with Chrome steel Gcr15
With Eccentric locking collar

 

 

INA Radial Insert Ball Bearings NO.:

Bearing No. d DSP B1
mm mm mm
GRAE12-XL-NPP-B 12 40 28,6
GRAE15-XL-NPP-B 15 40 28,6
GRAE17-XL-NPP-B 17 40 28,6
GRAE20-XL-NPP-B 20 47 31
GRAE25-XL-NPP-B 25 52 31
GRAE30-XL-NPP-B 30 62 35,8
GRAE35-XL-NPP-B 35 72 39
GRAE40-XL-NPP-B 40 80 43,8
GRAE45-XL-NPP-B 45 85 43,8
GRAE50-XL-NPP-B 50 90 43,8
GRAE55-XL-NPP-B 55 100 48,4
GRAE60-XL-NPP-B 60 110 53,1
GRAE20-XL-NPP-B-FA125 20 47 31
GRAE25-XL-NPP-B-FA125 25 52 31
GRAE30-XL-NPP-B-FA125 30 62 35,8
GRAE35-XL-NPP-B-FA125 35 72 39
GRAE40-XL-NPP-B-FA125 40 80 43,8
GRAE45-XL-NPP-B-FA125 45 85 43,8
GRAE50-XL-NPP-B-FA125 50 90 43,8
GRAE60-XL-NPP-B-FA125 60 110 53,1

 

Radial Insert Ball Bearings Introduction:

Radial insert ball bearings are single row, ready-to-fit units comprising a solid outer ring, an inner ring extended on one or both sides, cages made from plastic or sheet steel and seals of type P, R, L or T. Bearings with an inner ring extended on both sides undergo less tilting of the inner ring and therefore run more smoothly.

 

The outer ring has a spherical or cylindrical outside surface. In combination with an housing matched to the design, bearings with a spherical outer ring can compensate for misalignment of the shaft.

 

With only a few exceptions, radial insert ball bearings can be relubricated. For this purpose, they have two lubrication holes in one plane of the outer ring offset by 180°.

 

Radial insert ball bearings are particularly easy to fit and are suitable for drawn shafts of grade h6 up to h9. They are located on the shaft by means of eccentric locking collars, grub screws in the inner ring, adapter sleeves, drive slots or fit.

 

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


en_USEnglish