GC-C One Way Backstop Clutch With Roller Type

Details

Tags

Product Description:

Type GC-C is a roller type freewheel non-bearing supported nominal outer diameter is the same as a series 62 ball bearings. Bearings are required to support axial and radial loads. Units are delivered grease lubricated.
Standard arrangements is to install this type alongside a series 62 bearing within the same location toleranced. The inner race is keyed to the shaft. The outer race has a positive n6 tolerance to give a press fit in H7 housing, but the housing must be strong enough.
This series extensive used in machinery system of packing, printing, papermaking, weaving, chemical, medical, food and so on.

Product Parameter:

Model	Torque (N.m)	Overrunning Speed (rpm)		Dimension (mm)				Weight (Kg)
Model	Torque (N.m)	Inner Race	Outer Race	D(n7)	L	D(H7)	bn×tn	Weight (Kg)
CG-C1030	4.6	1750	2600	30	9	10	3×1.4	0.03
GC-C1232	8.5	1600	2400	32	10	12	4×1.8	0.04
GC-C1535	9.3	1400	2150	35	11	15	3×1.4	0.05
GC-C2047	27	1100	1650	47	14	20	6×2.8	0.12
GC-C2552	38	950	1450	52	15	25	8×3.3	0.14
GC-C3062	61	800	1200	62	16	30	8×3.3	0.22
GC-C3572	97	650	1000	72	17	35	10×3.3	0.31
GC-C4080	126	600	900	80	18	40	10×3.3	0.39
GC-C4585	148	500	800	85	19	45	8×2.8	0.44
GC-C5090	153	475	750	90	20	50	8×2.8	0.49
GC-C55100	209	400	650	100	21	55	16×4.3	0.66
GC-C60110	346	350	550	110	22	60	18×4.4	0.81
GC-C80140	722	300	450	140	26	80	22×5.4	1.41
GC-C1542	20	1200	1750	42	11	15	3×1.4	0.11
GC-C1545	27	1200	1750	45	15	15	3×1.4	0.12
GC-C2547	20	1100	1650	47	25	25	6×2.8	0.12
GC-C2562	60	800	1200	62	17	25	8×3.3	0.17