UCFL204 Flange Pillow Block Bearing Units

They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.

ବର୍ତ୍ତମାନ ଯୋଗାଯୋଗ କରନ୍ତୁ | pdf କୁ ଡାଉନ୍ ଲୋଡ୍ |

ବିବରଣୀ

ଟ୍ୟାଗ୍ସ

UCFL204 Bearing Is 2 Bolt Flange Bearing Housing Material Is With Cast Iron,Housing No. is FL204 With Insert Bearing UC204, Seals Type Is Nitrile Rubber And We Packed With Grease Chevron SRI-2,the UCFL Bearings Are Used For Manufacturing Plant, Construction works.

Shaft diameter	20 mm
Housing overall width	25.5 mm
Width, total	33.3 mm
Centre distance between bolt holes	90 mm
Bearing width, total	31 mm
Basic dynamic load rating	12.7 kN
Basic static load rating	6.7 kN
Limiting speed	6 500 r/min
Note	Limiting speed with shaft tolerance h6
Housing type	Flanged
Flanged housing type	Oval
Number of bolt holes for fasteners	2
Fastening bolt hole type	Plain
Retaining feature, inner ring	Set screws
Bore type	Cylindrical
Rubber seating ring	Without
Material, housing	Cast iron
Material, bearing	ଇସ୍ପାତ ବହନ କରିବା \|
Coating	Without
Sealing, bearing	Seal and flinger on both sides
Sealing type	Contact, standard
Sealing, unit	Optional end cover