high quality 6000 Series Deep groove ball bearing

Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.

Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance

KONTAKTIRAJTE ZDAJ naloži naloži v pdf

Podrobnosti

Oznake

Lightweight, stable and with good spinning characteristics. The deep groove ball bearing 6000-2RS is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications

Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance

d	10 mm	Bore diameter
D	26 mm	Outside diameter
B	8 mm	Width
C_r	5.300 N	Basic dynamic load rating, radial
C_0r	1.970 N	Basic static load rating, radial
C_ur	136 N	Fatigue load limit, radial
n_G	44.500 1/min	Limiting speed
n_ϑr	30.000 1/min	Reference speed
≈m	0,017 kg	Utež
d_{a min}	12 mm	Minimum diameter shaft shoulder
D_{a max}	24 mm	Maximum diameter of housing shoulder
r_{a max}	0,3 mm	Maximum fillet radius
r_min	0,3 mm	Minimum chamfer dimension
D₁	21,34 mm	Shoulder diameter outer ring
D₂	23,09 mm	Caliber diameter outer ring
d₁	14,66 mm	Shoulder diameter inner ring
d₂	13,69 mm	Caliber diameter inner ring
T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.
f₀	12,4	Calculation factor