CKZ-A Sprag Type Freewheels One Way Clutch

CKZ-A Sprag Type Freewheels One Way Clutch With Two Set Deep Groove Ball Support

تفاصيل

العلامات

Product Description:

1. CKZ-A Series Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISOR773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. Recommended shaft tolerances are shown in the table on the lower left.
4. External thrust load should be supported by other devices, not by the Cam Clutch.
5. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
6. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
7. Ambient temperature range is 5° To 40° C.
8. Key to be used should be in accordance with ISOR773. (DIN 6885.1)

Dimensions and Capacities:

يكتب	Torque Nm	Overrunning Speed r/min		Size								وزن kg
يكتب	Torque Nm	Overrunning Speed r/min		mm								وزن kg
		Inner Race	Outer Race	Dh7	B	F	نانومتر	H	D H7	C	bn×tn
CKZ-A2080	175	1200	510	80	60	68	4-م6	15	20	62	6×2.8	1.89
CKZ-A35100	630	1000	425	100	78	86	6-م8	20	35	80	10×3.3	3.60
CKZ-A40115	1115	900	400	115	80	100	6-م8	20	40	82	10×3.3	4.89
CKZ-A40120	1160	900	400	120	80	105	6-م8	20	40	82	10×3.3	5.39
CKZ-A42125	1268	900	400	125	90	105	6-م8	20	42	92	12×3.3	6.56
CKZ-A45140	1585	750	350	140	95	120	6-م10	25	45	97	14×3.8	8.78
CKZ-A50150	1900	700	300	150	95	130	6-م10	25	50	97	14×3.8	9.99
CKZ-A55160	2290	600	250	160	105	140	6-م10	25	55	107	16×4.3	12.47
CKZ-A65170	2720	600	200	170	105	150	6-م10	25	65	107	16×4.3	13.63
CKZ-A70180	3100	500	150	180	110	160	6-م10	25	70	112	2×4.9	15.91
CKZ-A1890	400	1100	460	90	54	75	6-M6	15	18	56	6×2.8	2.46
CKZ-A2590	400	1100	460	90	49	75	6-M6	15	25	50	8×2.5	2.35
CKZ-A25100	630	1000	425	100	79	88	6-م8	16	25	80	8×3.3	4.12
CKZ-A28100	630	1000	425	100	78	86	6-م8	20	28	80	8×3.3	3.98
CKZ-A30100	630	1000	425	100	78	86	6-م8	20	30	80	10×3.3	3.80
CKZ-A32100	630	1000	425	100	78	86	6-م8	20	32	80	10×6.3	3.71
CKZ-A38115	1115	900	400	115	80	100	6-م8	20	38	82	10×3.3	4.90
CKZ-A45125	1268	900	400	125	90	110	8-M8	25	45	92	14×3.8	6.51
CKZ-A50135	970	800	400	135	70	115	6-م10	20	50	72	14×3.8	6.61
CKZ-A5138	1580	750	350	138	101	124	6-م8	20	45	105	12×5.0	8.85
CKZ-A50160	2290	600	250	160	90	140	6-م10	20	50	90	14×3.8	12.86
CKZ-A50180	3100	500	150	180	124	158	6-م10	25	50	128	14×3.8	16.9
CKZ-A55145	1850	700	300	145	100	130	6-م8	20	55	102	14×3.8	9.42
CKZ-A55170	2720	600	200	170	110	146	8-M8	15	55	112	16×4.3	14.23